New construction clean-up
| ACME SERVICES We are the only local cleaning service pre-screened by Service Magic |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
NEW CONSTRUCTION CLEAN-UP
Acme Services provides comprehensive construction cleaning services
to meet North Carolina’s contractors' needs. Our construction
cleaning service provides construction contractors with complete
commercial and residential construction cleaning services for new
corporate buildings, shopping centers, schools, and residential
properties.
Acme Services utilizes the latest commercial cleaning techniques and
construction cleaning supplies to meet or exceed your high standards
of cleanliness and building appearance.
Acme Services provides the following construction cleaning services:
Phase One
Rough Clean Scope
Acme Services offers an extensive line of construction cleaning
services. Below, you will find a general list of the specifications we
use for rough cleans. Respectively, every project is different and we
accommodate the needs of our client accordingly. If the builder
requests a rough clean, it shall include but not be limited to the
following.
1. Remove any and all trash, dirt, and debris from the interior of the
unit and dispose of as directed by the Contractor's dumpster.
2. Clean all tubs, toilets, lavatories, kitchen sinks and appliances.
Remove any and all temporary protection and labels not required to
remain.
3. Clean out all kitchen cabinets and vanity cabinets. Clean all kitchen
counter tops and vanity tops.
4. Scrape and wash the inside and outside surfaces of all windows
and sliding glass doors. Do not scrape windows or scratch frames.
5. Clean all windows and sliding glass door frames, sills, and tracks.
6. Clean all utility closets, furnace closets, storage areas, garages, etc.
7. Clean all water heaters.
8. Clean water valve box (washing machine/dryer area).
Phase Two
Final Cleaning Scope
1. Remove any and all trash, dirt, and debris from the interior of the
unit and dispose of as directed by the Contractor's Dumpsters
2. Clean and polish kitchen cabinets, kitchen counter tops, and vanity
tops. Vacuum the inside of all cabinets, to remove dirt and debris.
Polish all cabinets, vanities, and other stained woodwork and all
stainless steel sinks using appropriate product.
3. Clean and shine the inside and outside surfaces of all windows
and sliding glass doors.
4. Clean and shine all plumbing fixtures and related trim to a sanitary
condition. Clean and shine all medicine cabinets, mirrors, and bath
accessories.
5. Clean and shine all electrical fixtures and trim.
6. Clean and shine all appliances. Remove all packing materials,
temporary labels, and operating and maintenance manuals. Place in
kitchen drawers as directed.
7. Clean all wood base, casing, and sills. Clean all wood shelving.
8. Clean the outside and inside of all exterior doors, including the
threshold. Clean and shine all interior doors.
9. Sweep and mop all VCT tile floors. Damp mop all tiles using a
shine and conditioner in the mop water.
10. Sweep all interior storage areas, garages, exterior patios.
11. Report any problems (Broken or Damaged) to builder.
12. Dust or vacuum walls as needed. if required.
Touch Up Cleaning and Pressure Wash
The touch-up clean is done after completion of the final and before
or after the punch list is generated. If it is done prior to the punch it
is to affect the overall length of the list. If it is done after the punch
it is mostly to clean up after the other subcontractors have done
their "re-dos" and to satisfy the new owner by handing them a ready-
to-use building/home. Not all projects require a touch-up as we do
our best to bring the project to a salable finish when we are doing
the final. Prepare Unit For Owner Acceptance and Occupant Move-In.
Touch-ups and pressure wash may be an additional price.
Check each unit. Clean, shine, dust and/or vacuum as required to
provide a salable unit.
2. Touch up and polish all cabinets, vanities, and other stained
woodwork and all stainless steel sinks using polish as approved by
the Contractor's Superintendent.
Additional trips or re-cleaning, if required in order to "sell the unit,"
shall be performed as and when required by the Contractor's
Superintendent. It may be an additional charge based on the
agreement made at the time of contact. If there is not a previous
agreement, arrangements will be made prior to cleaning.
Acme Services furnishes all necessary labor, material and equipment
for the construction cleaning services. Our company is licensed,
bonded, and insured through the State of North Carolina. Our
supervisors maintain quality control using strict safety and security
practices.
For A Free Estimate Contact Acme Commercial Cleaning Today!
| Acme Post Construction Cleaning Serving New Hanover, Brunswick, cumberland, Hoke and surrounding areas New Hanover and Brunswick County division 910-368-1603 Cumberland and Hoke County Division 910-262-6708 Post Construction Cleaning & New Construction Cleaning Service |
For A Free Estimate Contact Acme
Commercial Services Today!
ACME SERVICES
910-368-1603
ASK ABOUT OUR COMMERCIAL
SERVICES
New construction cleaning, office
and restaurant cleanings and
new construction (rg6) cable
installation and pre-wiring please
visit THE CONTRACTORS SITE
Established in 1983 insured
and bonded
10% of all profits are donated to
our local church's and to our
cleaning 4 cancer program
Commercial Services Today!
ACME SERVICES
910-368-1603
ASK ABOUT OUR COMMERCIAL
SERVICES
New construction cleaning, office
and restaurant cleanings and
new construction (rg6) cable
installation and pre-wiring please
visit THE CONTRACTORS SITE
Established in 1983 insured
and bonded
10% of all profits are donated to
our local church's and to our
cleaning 4 cancer program
| SERVING New Hanover, Brunswick, Cumberland, Hoke and surrounding counties |
Oak Island, Leland, Wilmington, Brunswick
county, New Hanover county and all
surrounding areas
county, New Hanover county and all
surrounding areas
Cumberland and Hoke County Division 910-262-6708